This is our baby CNC machine. In this section you will find information to help you get the most value from our X-Carve machine.
Our X-Carve CNC machine was donated to DMS by a generous benefactor on August 18, 2023.
Please be careful with our machine because it will cost us around $2500 to replace it with the current model.
https://www.inventables.com/products/x-carve-1
This process is being kept simple, but since we select to have a lot of users a bit of structure is required.
This simple process will help us verify members have both some knowledge and a small investment in the machine.
Members are limited to 1 hour sessions during peak usage times(people are waiting). If you have a complex job(2+ hours) then run it during off the off hours 10PM - 9AM. Pleading ignorance of the job's run times isn't acceptable since it is shown at the bottom of the preview. This rule will be enforced when people are waiting in the queue. If you are careful, you should be able to remove your job from the machine and return later and continue running the tool paths.
Becoming familiar with X-Carve
X-Carve Machine Proficiency Demonstration
Members from several committees are currently exploring awesome classes.
This is a great way to gain experience before investing the time to learn everything.
After attending one or more Make & Take classes you are then invited to display your competency by designing and cutting the file at a test-out session
The supported software for the x-carve machine is Easel.
Get started now by downloading a free copy
The following videos explain some basic aspects of using the machine.
Basic Operations
The First Carve on Your X-Carve Pro
Intermediate Techniques
Easel Intermediate Techniques
Bit Selection
Learn About Router Bits
Use Multiple Bits
Use Multiple Bits
X-Carve Projects
X-Carve Projects