This page is being reconstructed and might not contain correct information: If in doubt, please ask!

Contacting

If the classrooms need some maintenance that you are motivated to take care of it, but just need funding or want assistance accomplishing this task? Just email [email protected].

Class Sign In Sheet

Public Sign-In Google Doc

Overview (Guide to Rooms)

There are six general use classrooms. Their capacities and default set-ups are detailed in Rooms Guide.

Lobby Classroom

Lecture Hall

Lecture Hall Presentation Guide How to use the equipment

Lecture Hall Presentation Guide

Mu/th/er: Lecture Hall node

Monitor the Epson PowerLite HC-8350 Projector

The main goal here is to help preserve the projector lamp by:

monitoring the temperature of the air at the projector's
- intake
- exhaust port

RS-232 interface

male db9 connector"To use an AV controller with the projector, connect a 9-pin null modem serial cable to the RS-232C port."

Using the BeagleBone Black:
1. http://www.logicsupply.com/components/beaglebone/capes/cbb-ttl-232
  because all signals on the BeagleBone Black are 3.3 voltmale, $15

Using Raspberry Pi
1. http://www.ebay.com/itm/like/181629384677?lpid=82&chn=ps
  female, $10

Using any 3.3 thru 5.0 volt micro controller:
1. http://www.ebay.com/itm/MAX3232-RS232-Serial-Port-To-TTL-Converter-Module-DB9-Connector-ARDUINO-/171689092477
  Features:Communication Chip:MAX3232 chipOperating Voltage: 3.3V~5VaFour Interface:VCC,GND,RXD,TXDCan be used in STC SCM,STM32 SCM,NXP SCM,NEC SCMPackage Include:1pcs MAX3232 RS232 To TTL Converter Module DB9 Connector for ACM Robot Smart Car, ARDUINO, RASPBERRY PI, ETC.female, $11